Print Wax, 1 oz
Contents:(1) 1.2 oz container of mixed print waxWhat you need:You will need mico-fiber lint free cloths. NOTE: Any other cloth or rag will create lint that will be permanently embedded into your print surface. For Use on: To be used on Analogue fiber matte, and all 19th century alternative photographic prints made with cotton rag paper. Not to be used with digital images.
Application: To apply A&P print wax, dip your finger or edge of the cloth into the wax. No need to heat the wax before application. Apply a small amount of wax and gently rub the wax into the surface using small circular motion until the entire print is coated. Once the print is completely coated with wax, use a clean micro fiber cloth and gently buff and polish the wax into the surface using small circles until an appropriate sheen is achieved. Before you finish use long straight horizontal or vertical strokes to achieve consistency of sheen on the surface. You may do more then one coat but it may not be needed. Be sure to apply the wax in a dust and lint free environment.
This single container of wax will conservatively coat 6-7 8X10 prints. It would be advisable to test a small area of a work print before applying the wax to a final print.