Cyanotype Traditional Kit (SKU#CYANKIT)

Awaiting product image

Cyanotype Traditional Kit (SKU#CYANKIT)

$20.00

SKU: CYANKIT Category:

Description

Contains:

Part A: 250 ML

Part B: 250 ML

(2) Glass bottles with droppers

This kit contains dry chemistry only.  It is important to note that when you fill up the containers that you use tap water if your PH is 6.5 to 8.  If you have concerns about your of tap water, use distilled water.

Additional information

Weight 1.1 lbs

Related products

  • Placeholder Image

    Contains:

    Part A: Ferric Ammonium Citrate  100ML

    Part B: Tartaric Acid:                        100ML

    Part C: 10% Silver Nitrate:              100ML

    (1) 4 oz amber bottle for your working solution

    (1) 1 oz Glass bottle with dropper

    200 g of Sodium Thiosulfate

    This kit contains dry chemistry only.  It is important to note that when you fill up the containers that you use room temperature distilled water.

    *Silver Nitrate is very dangerous.  Keep away from eyes, clothing and skin.*

  • Placeholder Image

    Kallitype Kit with Developer:
    Contains:
    (1) 32 oz/ or 950 ml bottle of dry developer.
    (2) Packets of Citric Acid, 25g each
    (1) 200 ml bottle of Ferric Oxalate 20%
    (1) 200 ml bottle of Silver Nitrate 10%
    (1) 200g of Sodium Thiosulfate
    This kit contains dry chemistry only unless noted upon ordering. It is important to note
    that when you fill up the developer container that you use hot distilled water. Heat
    water to approx. 150 to 180 degrees
    What you need for this process.
    1. Electric Tea Kettle. You can also use any glass cookware to heat the water on the
    stove.
    2. Beaker/ Measuring Cup
    3. Thermometer
    4. Clean dedicated brushes.
    5. Paper to print on
    6. Distilled Water
    7. Darkroom trays
    8. Contact printing frame, or plate glass
    9. UV box for exposure or the sun.
    10.Rubber gloves